Silicone Bathroom Water Retaining Strip

Silicone bathroom water retaining strip is a kind of rubber strip that can be used as a dry-wet separation strip in the bathroom. It does not leak water. When using it, it needs to be used with glass glue. Both sides and both ends of the strip need to be sealed with sealant. The product is full of willfulness and can be bent.

Details of Silicone Bathroom Water Retaining Strip

Material: Silicone rubber
Product viscosity: High viscosity
Color: White, black, gray, pink, etc
Width: 15mm
Height: 30mm
Heat-resistant temperature: -100~200℃
Features:
High temperature resistance
Wear resistance
Corrosion resistance
Dry and wet separation
Not easy to mold

Front & Back of Silicone Bathroom Water Retaining Strip

Features of Silicone Bathroom Water Retaining Strip

Applications of Silicone Bathroom Water Retaining Strip

Trim strips, acoustic seals, weather seals, bathroom waterproofing.

DIY Shape of Silicone Bathroom Water Retaining Strip

Installation Steps & Precautions

Precautions:
1. Clean the ground to ensure that the ground is dry and free of dust.
2. Use a marker pen to mark the location that needs to be constructed in advance.
3. Tear off the release film of the water retaining strip, attach it according to the marked position, and press firmly to ensure that the water retaining strip is more tightly attached to the ground.
4. Apply edge sealing glue along the side of the water retaining strip that meets the water to ensure that all the gaps are sealed well.
5. After the installation is completed, let it stand for 8-24 hours, and wait for the edge sealant to dry before using it. 
(Note: Do not apply the edge sealant to the bottom of the back glue of the water retaining strip)

We ask the service staff to always think about the customers, solve the problems of the equipment in time, and make sure that the interests of customers are above everything else.